AZ1015. CD Radio Cassette Recorder. Toll Free Help Line. Ligne d assistance en service libre Linea de ayuada telefónica sin cargo

CD Radio Cassette Recorder AZ1015 Toll Free Help Line Ligne d assistance en service libre Linea de ayuada telefónica sin cargo Return your Warranty Registration card today to ensure you receive

Please download to get full document.

View again

of 27
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.


Publish on:

Views: 44 | Pages: 27

Extension: PDF | Download: 0

CD Radio Cassette Recorder AZ1015 Toll Free Help Line Ligne d assistance en service libre Linea de ayuada telefónica sin cargo Return your Warranty Registration card today to ensure you receive all the benefits you re entitled to. Once your Philips purchase is registered, you re eligible to receive all the privileges of owning a Philips product. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits. Warranty Verification Registering your product within 10 days confirms your right to maximum protection under the terms and conditions of your Philips warranty. Owner Confirmation Your completed Warranty Registration Card serves as verification of ownership in the event of product theft or loss. Model Registration Returning your Warranty Registration Card right away guarantees you ll receive all the information and special offers which you qualify for as the owner of your model. Know these safety symbols CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. For Customer Use Enter below the Serial No. which is located on the bottom of the cabinet. Retain this information for future reference. Model No. Serial No. This bolt of lightning indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. The exclamation point calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. CAUTION: To prevent electric shock, match wide blade of plug to wide slot, and fully insert. 2 English Safety instructions...2 & 4 Limited warranty...5 Controls...6 Power supply...7 Basic functions...8 Radio...8 CD player Cassette recorder General information...14 Troubleshooting...15 English Français Conseils de sécurite Garantie limitée...19 Comandes...20 Alimentation...21 Fonctions de base...22 Radio...22 Lecteur de CD Platine cassette Informations général...28 Recherche de pannes...29 Français Español Instrucciones sobre seguridad Garantia limitada...33 Controles...34 Fuente de alimentación...35 Funciones básicas...36 Radio...36 Reproductor CD Grabadora Información general...42 Localización de averías...43 Español Canada English: This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. Français: Cet appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de Classe B prescrites dans le Règlement sur le Brouillage Radioélectrique édicté par le Ministère des Communications du Canada. 3 SAFETY INSTRUCTIONS Read before operating equipment This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 1. Read Instructions All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions The safety and operating instructions should be retained for future reference. 3. Heed Warnings All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions All operating and use instructions should be followed. 5. Water and Moisture The appliance should not be used near water for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool, etc. 6. Carts and Stands The appliance should be used only with a cart or stand that is recommended by the manufacturer. 6A An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. 7. Wall or Ceiling Mounting The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer. 8. Ventilation The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or, placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings. 9. Heat The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. 10. Power Sources The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 11. Grounding or Polarization Precautions should be taken so that the grounding or polarization means of an appliance is not defeated. AC Polarized Plug CAUTION: To prevent electric shock, match the wide blade of this plug to the wide slot, fully insert. Do not use this (polarized) plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure. 12. Power-Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords and plugs, convenience receptacles, and the point where they exit from the appliance. 13. Cleaning The appliance should be cleaned only as recommended by the manufacturer. 14. Power Lines An outdoor antenna should be located away from power lines. 15. Nonuse Periods The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. 16. Object and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 17. Damage Requiring Service The appliance should be serviced by qualified service personnel when: A. The power-supply cord or the plug has been damaged; or B. Objects have fallen, or liquid has spilled into the appliance; or C. The appliance has been exposed to rain; or D. The appliance does not appear to operate normally or exhibits a marked change in performance; or E. The appliance has been dropped, or the enclosure damaged. 18. Servicing The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel. EL : 91/8 4 LIMITED WARRANTY PORTABLE AUDIO One Year Free Exchange This product must be carried in for an exchange. WHO IS COVERED? You must have proof of purchase to exchange the product. A sales receipt or other document showing that you purchased the product is considered proof of purchase. Attach it to this owner s manual and keep both nearby. WHAT IS COVERED? Warranty coverage begins the day you buy your product. For one year thereafter, a defective or inoperative product will be replaced with a new, renewed or comparable product at no charge to you.a replacement product is covered only for the original warranty period.when the warranty on the original product expires, the warranty on the replacement product also expires. WHAT IS EXCLUDED? Your warranty does not cover: labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or repair of antenna systems outside of the product. product repair and/or part replacement because of misuse, accident, unauthorized repair or other cause not within the control of Philips Consumer Electronics Company. reception problems caused by signal conditions or cable or antenna systems outside the unit. a product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications. incidental or consequential damages resulting from the product. (Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you.this includes, but is not limited to, prerecorded material, whether copyrighted or not copyrighted.) a product used for commercial or institutional purposes. WHERE IS EXCHANGE AVAILABLE? You may exchange the product in all countries where the product is officially distributed by Philips Consumer Electronics Company. In countries where Philips Consumer Electronics Company does not distribute the product, the local Philips service organization will attempt to provide a replacement product (although there may be a delay if the appropriate product is not readily available). EXCHANGING A PRODUCT IN U.S.A., PUERTO RICO OR U.S.VIRGIN ISLANDS... Contact your dealer to arrange an exchange. Or, ship the product, insured and freight prepaid, and with proof of purchase enclosed, to the address listed below. Small Product Service Center Philips Service Company 907 Snapps Ferry Road, Plant 2, Building 6 Greeneville,TN (In U.S.A., Puerto Rico and U.S.Virgin Islands, all implied warranties, including implied warranties of merchantability and fitness for a particular purpose, are limited in duration to the duration of this express warranty. But, because some states do not allow limitations on how long an implied warranty may last, this limitation may not apply to you.) EXCHANGING A PRODUCT IN CANADA... Please contact Philips at: (French Speaking) (English Speaking) (In Canada, this warranty is given in lieu of all other warranties. No other warranties are expressed or implied, including any implied warranties of merchantability or fitness for a particular purpose. Philips is not liable under any circumstances for any direct, indirect, special, incidental or consequential damages, howsoever incurred, even if notified of the possibility of such damages.) TO GET OUT-OF-WARRANTY EXCHANGE... In U.S.A., Puerto Rico or U.S.Virgin Islands, contact Philips Service Company at (800) to obtain the cost of outof-warranty exchange.then carefully pack the product and ship it to the Small Product Service Center (address listed above). In Canada, call the phone number listed above under Exchanging a Product in Canada to obtain the cost of outof-warranty exchange. REMEMBER... Please record the model and serial numbers found on the product below.also, please fill out and mail your warranty registration card promptly. It will be easier for us to notify you if necessary. MODEL # SERIAL # BEFORE REQUESTING EXCHANGE... Please check your owner s manual before requesting an exchange.adjustments of the controls discussed there may save you a trip. This warranty gives you specific legal may have other rights which vary from state/province to state/province. Philips Service Solutions Group, P.O. Box 555, Jefferson City,Tennessee 37760, (423) EL6095T001 / MAC5433 / SHUFFLE REPEAT VOLUME DBB DYNAMIC BASS CD MODE OPEN FM AM TUNING CONTROLS English 5 BOOSTCD SYNCHRO START RECORDING PAUSE STOP.OPEN SEARCH PLAY RECORD SEARCH SEARCH STOP 6 BASIC FUNCTIONS 1 POWER: CD, TAPE, BAND...selects the sound source 2 DBB...enhances the bass 3 VOLUME...adjusts the volume level 4 p mm headphone socket (back of the set) Note: Connecting the headphones will switch off the speakers. 5 CASSETTE RECORDER PAUSE ;...pauses recording or playback STOP OPEN 9/..stops the tape and opens the cassette compartment SEARCH 6...rewinds the tape SEARCH forwards the tape PLAY 1...starts playback RECORD 0...starts recording 6...Sensor for the infrared remote control RADIO 7 to radio stations 1 BAND: FM, AM...selects the wave band 8 CD PLAYER / OPEN...opens the CD compartment 9...stops CD play and erases the program 2;...starts and pauses CD play...skips and searches forward...skips and searches backward CD MODE...selects the different CD playing modes and programs tracks 9...Display REMOTE CONTROL SHUFFLE...plays CD tracks in random order REPEAT...repeats a track, the entire CD, or the program 2;...starts and interrupts CD play...selects the beginning of a current, previous or subsequent track of a CD 9 STOP...stops CD play and erases the program 56SEARCH...searches backward/forward in a CD track 6 POWER SUPPLY Batteries For the set (optional) Open the battery compartment of the set and insert 6 batteries, type R20, UM-1, or D-cells (preferably alkaline). English For the remote control (supplied) Open the battery compartment of the remote control and insert 2 batteries, type R03, UM-4 or AAA-cells (preferably alkaline). Remove batteries if they are dead or if the set is not going to be used for a long time. Batteries contain chemical substances, so they should be disposed of properly. AC power supply 1 Check whether the voltage as shown on the type plate corresponds to your local voltage. If it does not, consult your dealer or service organization. The type plate is located on the bottom of the set. A 2 If the set is equipped with a VOLTAGE selector A, set this selector to the local voltage. 3 Connect the AC power cord to the AC MAINS socket and to the wall socket. This switches on the AC power supply. The AC power cord is inside the battery compartment. The battery supply will be switched off when the set is connected to the AC power. To change to battery supply, disconnect the AC power cord from the unit s AC MAINS socket. To disconnect the set from the AC power completely, remove the AC power cord from the wall socket. The set complies with the FCC-Rules, Part 15 and with 21 CFR Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. 7 CD POWER FM AM BASIC FUNCTIONS RADIO English Switching the set on and off Set the POWER control to the desired sound source: CD, TAPE, or BAND (for radio). The set is switched off when the POWER control is set to OFF/TAPE and the keys of the tape deck are released. OFF BAND TAPE POWER DBB DYNAMIC BASS BOOST Note: If you use batteries, switch the set off after use. This will avoid unnecessary power consumption. CD SYNCHRO STAR Adjusting volume and sound Adjust the volume using the VOLUME control. Increase and decrease the bass level by pressing DBB. The bass level can also be emphasized if you place the set against a wall or shelf. Do not cover any vents; leave sufficient room around the unit for ventilation. DBB DYNAMIC BASS BOOST VOLUME CD SYNCHRO STAR Radio tuning to radio stations 1 Set the POWER control to FM or AM to select the desired wave band. 2 Tune to the desired radio station by using the TUNING wheel. FM AM HRO START RECORDING Improving RADIO reception For FM stations, pull out the telescopic antenna. To improve the signal, incline and turn the antenna. Reduce its length if the signal is too strong (very close to a transmitter). For AM stations, direct the internal antenna by turning the whole set. The telescopic antenna is not needed. OPEN 8 CD MODE CD PLAYER Playing a CD 1 Set the POWER control to CD. 2 Press / OPEN to open the CD compartment. ECORD SEARCH PLAY RECORD OPEN English 3 Insert an audio CD (printed side up) and close the CD compartment. The CD player starts and scans the contents list of the CD. Then, the CD player stops. Display indication: the total number of tracks. 4 Press the 2; button to start CD play. Display indication: the current track number. 5 Press the 9 button to stop CD play. Display indication: the total number of tracks. You can pause CD play by pressing 2;. Continue CD play by pressing the button again. Display indication: the current track number (flashing). Note: CD play will also stop if: you open the CD compartment, the end of the CD is reached, or you move the POWER control. If you make a mistake when operating the CD player, or if the CD player cannot read the CD, the display shows E or no. (See TROUBLESHOOTING.) If you press 2; and there is no CD inserted, the display shows no. Environmental information All redundant packing material has been omitted. We have done our utmost to make the packaging easily separable into three mono materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). Your set consists of materials which can be recycled if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packing materials, dead batteries and old equipment. 9 CD PLAYER English Search backward and forward Selecting another track Briefly press the or button once/several times to skip to the beginning of the current, previous or subsequent track(s). During CD play: CD play continues automatically with the selected track. When CD playback is stopped: Press 2; to start CD play. Display indication: the selected track number. CD MODE Searching for a passage during CD play 1 Hold down the or button to find a particular passage in a forward or backward direction. CD play continues at a low volume. 2 Release the button when you have reached the desired passage. Note: In the different CD modes or when playing a program, searching is only possible within the particular track. CD MODE: Shuffle and Repeat 1 During CD play press CD MODE repeatedly to cause the display to show the different playing modes. SHUFFLE: All tracks of the CD (or program) are played in random order. SHUFFLE REPEAT ALL: All tracks of the CD (or program) are played repeatedly in random order. REPEAT: The current track is played repeatedly. REPEAT ALL: The entire CD (or program) is played repeatedly. CD MODE 2 After 2 seconds of flashing display indication, CD play starts in the chosen mode. 3 To return to normal CD play, press CD MODE until the display indication disappears. REPEAT ALL SHUFFLE 10 CD PLAYER CD MODE: Programming track numbers You can select a number of tracks and store these in the memory in the desired sequence. You can store any track more than once. A maximum of 20 tracks can be stored in the memory. English 1 When CD play is stopped, select the desired track with or. 2 As soon as the number of the desired track is displayed, press CD MODE to store the track in the memory. PROGRAM appears on the display. P lights up briefly, then the number of the stored track is shown. CD MODE PROGRAM 3 Select and store all desired tracks in this way. 4 You can review your settings by pressing and holding CD MODE for more than 1 second. The display shows all stored track numbers in sequence. If you try to store more than 20 tracks, the display shows F. PROGRAM Playing the program Press 2; to play the program. PROGRAM Erasing the program When playback is stopped, press 9. no lights up briefly, PROGRAM disappears and your program is erased. Note: The program will also be erased if you: interrupt the power supply, open the CD compartment, or move the POWER control. PROGRAM 11 CASSETTE RECORDER Playing a cassette 1 Set the POWER control to TAPE. CD SYNCHRO START RECORDING English 2 Press STOP OPEN 9 / to open the cassette compartment. OPEN 3 Insert a recorded cassette with the open side upwards and close the cassette compartment. PAUSE STOP RECORD SEARCH PLAY RECORD 4 Press PLAY 1 to start playback. 5 Press 6 or 5 to rewind or fast forward the tape. 6 To stop the tape press STOP OPEN 9 /. Note: The keys are released at the end of the tape. General information on recording Recording is permissible insofar as copyright or other rights of third parties are not infringed upon. For recording on this set you should use a cassette of the type NORMAL (IEC type I). This deck is not suitable for recording on cassettes of the type CHROME (IEC type II) or METAL (IEC type IV). The recording level is set automatically
Related Search
Similar documents
View more...
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks